Skip to main content
You have permission to edit this article.
Edit
Install a whole house fan
AP

Install a whole house fan

  • 0
{{featured_button_text}}
diy-fan-20210503

To lower the use and expense of air conditioning, consider installing a whole house fan.

To lower the use and expense of air conditioning a home in the dog days of summer, consider installing a whole house fan to cool it down. The fan, usually installed on the second floor in the ceiling, is designed to pull air through open windows and doors and exhaust it out through the attic to the outdoors. It works best in the evening as the temperature drops, so fresh air is pulled in and forces hot air through attic vents. By morning you’ll be reaching for a blanket after a cool night’s sleep.

An electrician charges $660, including labor and material, to install a belt-driven attic fan that cools a typical 1,500-square-foot house. A homeowner with electrical and carpentry skills can buy one for $450, install it and save about 32%.

The project involves some major heavy-duty work: cutting an opening in the ceiling, installing the unit in the opening, hooking up the wires and then adding the louvered cover panel. This piece is heavy, so have a strong helper on hand to muscle the fan into position. If cutting a hole in your ceiling intimidates you, don’t hesitate to call a contractor.

Follow the fan manufacturer’s directions about wiring the unit into your home’s electrical system and to any switches or controls you choose. For the easiest installation, choose a direct-drive unit that’s designed to fit over the attic floor joists so you don’t have to cut into them. You’ll find them sold online and at home centers and lumberyards.

To find more DIY project costs and to post comments and questions, visit www.diyornot.com.

Pro Cost — DIY Cost — Pro time — DIY Time — DIY Savings — Percent Saved

$660 — $450 — 8.6 — 10.0 — $210 — 32%

Make your house a home

* I understand and agree that registration on or use of this site constitutes agreement to its user agreement and privacy policy.

Related to this story

Most Popular

A small upgrade that made a big difference in our backyard security was adding a motion-sensing exterior light at the rear of the house where we parked the car. When we returned home in the dark it wasn’t easy to see the path that led to our back door, but the addition of a security light made all the difference, not to mention ensure all was safe. A sensor knows when someone crosses its path and creates a safe and stumble-free passage, even when there’s snow on the ground or no bright moon to guide you.

Get up-to-the-minute news sent straight to your device.

Topics

Breaking News

Sports Breaking News

News Alert